Insulated Pins D8

suitable as a connecting element for various electrotechnical devices (e.g. shunt device, power take-off set, connecting cable, etc.), suitable for holes with a...

Connection Cable Shunt 250A/200A 3m D8

suitable for bridging a phase under load in LV systems (e.g. replacing / replacing fuses, connecting / disconnecting lines, etc.). Technical characteristics:...

Set Insulated Perforation Clamps 10-95

insulated perforation clamp, suitable as a connecting element for various electrotechnical devices (e.g. shunt device, power take-off set, measuring devices,...

Insulated Clamps

connection socket D4mm according to DIN EN 61010-031 designed for a load of max. 16A, nominal voltage up to 600V AC / DC (50-60Hz), overvoltage category III

Set Adapter for Measuring D4

adapter for the connection of analysis or measuring instruments as well as electrical devices to hexagon screws, hexagon socket, wrench width 6 or threaded rods...

Magnetic angle adapter DA606-6

suitable for connecting measuring analysis devices, e.g. for applications on machines, contacting with a magnet. Technical characteristics: Overvoltage category...

Perforation Clip for Measuring

suitable for measuring tension by means of perforation directly on the cable. Technical characteristics: Connection of measuring tips by means of a hole,...

Insulated grip

insulated handle for mounting the insulated terminal D4mm / D8mm, according to EN / IEC 60900

Insulated Clamp D8 red

for shunt devices, power supply sets, connecting cables

Adapter Set

adapters for bridging the current draw and for measuring purposes (e.g. shunt device, power take-off set, connecting cables, measuring devices, etc.) on allen...

Connection Cable

adapter extension D8, suitable as a connecting element for bridging devices and current tapping assemblies, especially in hard-to-reach places in a wide variety...

Hex Tightening Inserts

insert of hexagon socket screws for insulated terminals, application only possible in combination with insulated terminal D4 / D8, the design guarantees a...

Tightening Insert D6

insert cylindrical contact pin D6, application only possible in combination with insulated terminal D4 / D8, the design guarantees a secure and force-fitted...

Clamping Insert S8

insert for hexagon socket screws, application only possible in combination with insulated terminal D4 / D8, the integrated spreading mechanism guarantees a...

Insulated Clamping Inserts

use for hexagon socket screws with insulated shaft, application only possible in combination with insulated terminal D4 / D8, the integrated spreading mechanism...

Insulated Clamping Insert D8

adapter insert for D8mm holes, application only possible in combination with insulated terminal D4 / D8, the integrated spreading mechanism guarantees a secure...

Hex Cap

is used to enable contacting on threaded bolts M8, M10, M12 using SW13 insert, the safe assembly and disassembly of the cap nuts is carried out using a cap nut...

Insulated Clamping Insert 13mm

cap nut adapter SW13, use only in combination with an insulated handle (Order No. 22011) and intercable cap nut SW13, for attaching the SW13 cap nuts to...

INTERCABLE QUALITY


The name “Intercable” is synonymous with quality

We take customer specifications, the applicable legal obligations, standards and requirements into account, while casting a critical eye over the sustainability and environmental compatibility of everything we do to guarantee that Intercable maintains the very highest quality standards in all areas.

QUALITY CERTIFICATIONS

Siegel ISO

SERVICE IS A STRENGTH


It is important to recognize and take advantage of opportunities!

A customer relationship is a matter of trust. This trust is built upon our company's long-standing quality policy, which makes it one of our priorities to identify the needs and expectations of users in order to fulfil them in a quick, effective and environmentally friendly manner.

The demands of our customers and the competition encourage us to constantly strive to expand our offerings and optimize our products in order to improve our quality and environmental performance. 

"TECHNOLOGY IS OUR
PASSION"


Already fan of

PLANTS


Italy (Headquarter Tools)

Intercable Tools GmbH
Rienzfeldstrasse, 21
IT-39031 Brunico
Tel: +39 0474 571 700

Germany

Intercable Tools GmbH
Leverkuser Strasse 65
DE-42897 Remscheid
Tel: +49 (0)2191 37 694-0

Austria

Intercable Tools Austria Ges.m.b.H.
Resselstraße 16
AT-2120 Wolkersdorf
Tel: +43 (0) 2245 21234

Central Eastern Europe

Intercable CEEu Kft.
Magyar utca 162/A
HU-8800 Nagykanizsa

Already fan of